> Solving Problems > Cannot Print, Scan, or Fax > Paper Does Not Feed Properly > Original Does Not Feed into the ADF

Original Does Not Feed into the ADF

One of the following situations may be the cause.

Unsupported originals are being used.

Solutions

Use originals supported by the ADF.

The originals are loaded incorrectly.: Solutions

Load originals in the correct direction, and slide the ADF edge guide against the edge of the originals.

Too many originals are loaded in the ADF.: Solutions

Do not load originals above the line indicated by the triangle symbol on the ADF.

The original slips when paper dust adheres to the roller.

Solutions

Clean the inside of the ADF.

An original is placed on the scanner glass.: Solutions

Make sure that an original has not been placed on the scanner glass.

WF-2930 Series WF-2910 Series