Print Settings

Prints received faxes with large-size documents reduced to fit on the paper in the paper source. Reducing may not always be possible depending on the received data. If this is turned off, large documents are printed at their original size on multiple sheets, or a blank second page may be ejected.

Prints received faxes with the page split when the size of the received documents is larger than the size of the paper loaded in the printer. If the amount that exceeds the paper length is less than the value set in Delete Print Data After Split- Threshold, the excess is discarded. If the amount that exceeds the paper length is over the set value, the excess is printed on another paper.

Select the area of the document to delete when the amount that exceeds the paper length is less than the value set in Threshold.

If the amount that exceeds the paper length is less than or equal to this value, the excess is discarded and is not printed.

When this is set to On and the data is divided and printed because the amount exceeds the Delete Print Data After Split > Threshold, the divided data is printed using the overlapping length specified in Overlapping Width.

Data that exceeds this value is printed over.

Rotates faxes received as landscape-oriented A5 size documents so that they are printed on A5 size paper. This setting is applied when the paper size setting is set to A5.

By selecting Off, faxes received as landscape-oriented A5 size, which are the same width as A4 portrait documents, are assumed to be A4 size faxes and printed as such.

Check the paper size setting in Settings > General Settings > Printer Settings > Paper Source Settings.

Prints reception information on the received fax, even if the sender does not set the header information. The reception information includes the received date and time, sender's ID, and page number (such as "P1"). When Split Page Settings is enabled, the split page number is also included.

Prints multiple pages of received faxes on both sides of the paper.

Select the binding position.

Select options to start printing the faxes to receive.

• All Pages Received: Printing starts after receiving all of the pages. To start printing from the first page or last page depends on the setting of Collation Stack feature. See the explanation for Collation Stack.

• First Page Received: Starts printing when the first page is received, and then prints in order as the pages are received. If the printer cannot start printing, such as when it is printing other jobs, the printer starts printing received pages as a batch when it is available.

Since the first page is printed last (output to the top), the printed documents are stacked in the correct page order. When the printer is running low on memory, this feature may not be available.

During the specified time period, the printer saves documents received in the printer's memory without printing them. This feature can be used for noise prevention at night or to prevent confidential documents from being disclosed while you are away. Before using this feature, make sure there is enough free memory.

Stops printing documents.

Restarts printing documents automatically.

Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.