Setting Up the Control Panel

1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

   You can check the printer's IP address using the following menu.

   • Wired LAN or Wireless LAN
     Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select the following menu.

   Device Management tab > Control Panel

4. Set up the following items as necessary.

   • Language
     Select the language you want to display on the control panel.
   • Panel Lock
     If you select ON, you cannot select items that require the administrator's authority. To select them, log in to the printer as the administrator.
   • Operation Timeout
     If you select ON, you will be automatically go to the home screen if there is no activity for a certain period of time.
     You can select 10 seconds to 240 minutes, in one second increments.
   Note:

   You can also set up from the printer’s control panel.

   • Language : Settings > General Settings > Basic Settings > Language

   • Panel Lock : Settings > General Settings > System Administration > Security Settings > Admin Settings > Lock Setting

   • Operation Timeout : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or Off.)

5. Click OK.