WF-4930 Series WF-4920 Series

User's Guide

> Administrator Information > Settings to Use the Printer > Selecting the Default Values for Scanning, Copying, and Sending Faxes (User Default Settings)

Selecting the Default Values for Scanning, Copying, and Sending Faxes (User Default Settings)

You can set the default value for the following functions.

  • Scan to Network Folder/FTP

  • Scan to Email

  • Scan to Memory Device

  • Scan to Cloud

  • Copy

  • Fax

  1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

    You can check the printer's IP address using the following menu.

    • Wired LAN or Wireless LAN
      Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select one of the following menus, depending on the default settings you want to configure.

    Scan/Copy tab > User Default Settings

    Fax tab > User Default Settings

  4. Select settings as necessary.

  5. Click OK.

    If an invalid combination of values is selected, it is automatically adjusted to a valid setting.