Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Network Settings
Wi-Fi Setup
Set up or change wireless network settings. Choose the connection method from following and then follow the instructions on the control panel.
Router
Wi-Fi Setup Wizard
Push Button Setup (WPS)
Others
PIN Code Setup (WPS)
Wi-Fi Auto Connect
Disable Wi-Fi
You may be able to resolve network problems by disabling the Wi-Fi settings or making the Wi-Fi settings again. Select > Router > Change Settings > Others > Disable Wi-Fi > Start Setup.
Wi-Fi Direct
iOS
Android
Other OS Devices
Change
Change Network Name
Change Password
Change Frequency Range
This setting may not be displayed depending on the region.
Disable Wi-Fi Direct
Restore Default Settings
Wired LAN Setup
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-Fi connections are disabled.
Network Status
Displays or prints the current network settings.
Wired LAN/Wi-Fi Status
Displays the network information (device name, connection, signal strength, and so on) for Ethernet or Wi-Fi connections.
Wi-Fi Direct Status
Displays whether
Wi-Fi Direct is enabled or disabled, and the
SSID, password and so on for
Wi-Fi Direct connections.
Print Status Sheet
Prints a network status sheet. The information for Ethernet, Wi-Fi,
Wi-Fi Direct, and so on is printed on two or more pages.
Connection Check
Checks the current network connection and prints a report. If there are any problems with the connection, see the report to solve the problem.
>