Printer Settings

Select the paper size and paper type you loaded in the paper source. You can make Favorite Paper Settings in paper size and paper type.

Select On to feed paper from the paper source set as A4 size when there is no paper source set as Letter, or feed from the paper source set as Letter size when there is no paper source set as A4.

When paper runs out, paper is automatically fed from a paper source that has the same settings as the paper settings for the print jobs. You can set automatic selection for each paper source. You cannot set everything to off.

This setting is disabled when you select a specific paper source in the paper settings for the print jobs. Depending on the paper type setting on the Main tab of the printer driver, paper may not be fed automatically.

Select On to display an error message when the selected paper size or type does not match the loaded paper.

Select On to display the Paper Setting screen when loading paper in the paper source. If you disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.

These print settings are applied when you print by an external device without using the printer driver.

Select an action to perform when a 2-sided printing error or a memory full error occurs.

• On

  Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints only what the printer could process when a memory full error occurs.

• Off

  Displays an error message and cancels printing.

Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.

Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level.

Select the ink drying time you want to use when performing 2-sided printing. The printer prints the other side after printing one side. If your printout is smeared, increase the time setting.

Select On to extend the paper output support automatically when printing paper.

Select Enable to allow a computer to access the printer when connected by USB. When Disable is selected, printing that is not sent over a network connection is restricted.