Scanning Originals to a Network Folder

1. Place the originals.

   Placing Originals

2. Select Scan > Network Folder/FTP on the control panel.

3. Specify the folder.

   • To select from frequently used addresses: Select a contact from Frequent tab.
   • To enter the folder path directly: Select Keyboard. Select Communication Mode, enter the folder path as the Location (Required), and then make other folder settings.
     Enter the folder path in the following format.
     When using SMB as the communication mode: \\host name\folder name
     When using FTP as the communication mode: ftp://host name/folder name
     When using FTPS as the communication mode: ftps://host name/folder name
     When using WebDAV (HTTPS) as the communication mode: https://host name/folder name
     When using WebDAV (HTTP) as the communication mode: http://host name/folder name
   • To select from the contacts list: Select Destination tab, select a contact.
     To search for a folder from the contacts list, select .
   Note:

   You can print the history of the folder in which documents are saved by tapping Menu.

4. Select Scan Settings, and then check settings such as the save format, and change them if necessary.

   Menu Options for Scanning to a Folder

   Note:

   • Select to save your settings as a preset.

   • Select to restore settings to their defaults.

   • To save the originals to the storage, select File Storing and make the settings. Set Setting to select whether or not to save the scanned image only to the storage.

     You need not enter the destination information if you save the scanned image only to the storage.

5. Tap .