Printer Settings

Select the paper size and paper type you loaded in the paper source.

Select On to give printing priority to paper loaded in the paper tray.

Select On to feed paper from the paper source set as A4 size when there is no paper source set as Letter, or feed from the paper source set as Letter size when there is no paper source set as A4.

If you enable Paper Setting > Auto, paper is automatically fed from a paper source that has the same settings as the paper settings for the current print job when paper runs out. In this menu, you can set automatic selection for each paper source. You cannot set everything to off.

This setting is disabled when you select a specific paper source in the paper settings for the print jobs. Depending on the paper type setting on the Main tab of the printer driver, paper may not be fed automatically.

Select On to display an error message when the selected paper size or type does not match the loaded paper.

Select On to display an error message when the selected paper size does not match the loaded paper.

Select On to display an error message when the selected paper type does not match the loaded paper.

Select On to display the Paper Setting screen when loading paper in the paper source. If you disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.

Select the printing language for the USB interface or the network interface.

Select the printing language for the USB interface.

Select the printing language for the network interface.

These print settings are applied when you print by an external device without using the printer driver. The offset settings are applied when you print using the printer driver.

Adjust the top margin of the paper.

Adjust the left margin of the paper.

Adjust the top margin for the back of the page when performing 2-sided printing.

Adjust the left margin for the back of the page when performing 2-sided printing.

Select On to check the paper width before printing. This prevents printing beyond the edges of the paper when the paper size setting is incorrect, but this may lower the print speed.

Skips blank pages in the print data automatically to save paper.

Select the PDL Print Configuration options you want to use for PCL or PostScript printing.

Select the common settings for PCL or PostScript printing.

Select the default paper size for printing.

Select the default paper type for printing.

Select the default orientation for printing.

Select the print quality.

Select On to save ink by reducing the print density.

Select the print order, from the first page or the last page.

Starts printing from the first page of a file.

Starts printing from the last page of a file.

Set the number of copies to print.

Select the binding position.

Select On to eject paper automatically when printing is stopped during a print job.

Select On to perform 2-sided printing.

Make settings for PCL printing.

Select to use a font preinstalled on the printer.

Select to use a font you have downloaded.

Select the default font number for the default Font Source. The available number varies depending on the settings you made.

Set the default font pitch if the font is scalable and of fixed-pitch. You can select from 0.44 to 99.99 cpi (characters per inch), in 0.01 increments.

This item may not appear depending on the Font Source or Font Number settings.

Set the default font height if the font is scalable and proportional. You can select from 4.00 to 999.75 points, in 0.25 increments.

This item may not appear depending on the Font Source or Font Number settings.

Select the default symbol set. If the font that you selected in the Font Source and the Font Source setting is not available in the new symbol set setting, the Font Source and the Font Number settings are automatically replaced with the default value, IBM-US.

Set the number of lines for the selected paper size and orientation. This also causes a line spacing (VMI) change, and the new VMI value is stored in the printer. This means that later changes in the page size or orientation settings cause changes in the Form value based on the stored VMI.

Select the line feed command when printing with a driver from a specific operating system.

Select the line feed command when printing with a driver from a specific operating system.

Set the assignment for the paper source select command. When 4 is selected, the commands are set as compatible with the HP LaserJet 4. When 4K is selected, the commands are set as compatible with the HP LaserJet 4000, 5000, and 8000. When 5S is selected, the commands are set as compatible with the HP LaserJet 5S.

Make settings for PS printing.

Select On to print a sheet showing the status when an error occurs during PostScript or PDF printing.

Select the color mode for PostScript printing.

Select On when printing data that contains binary images. The application may send the binary data even if the printer driver setting is set to ASCII, but you can print the data when this feature is enabled.

Select the paper size when printing a PDF file.

Select an action to perform when a 2-sided printing error or a memory full error occurs.

• On

  Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints only what the printer could process when a memory full error occurs.

• Off

  Displays an error message and cancels printing.

Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.

Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level. Select On to prioritize reducing operation noise. To prioritize printing speed, select On (Low Level).

Select the ink drying time you want to use when performing 2-sided printing. The printer prints the other side after printing one side. If your printout is smeared, increase the time setting.

Select Enable to allow a computer to access the printer when connected by USB. When Disable is selected, printing that is not sent over a network connection is restricted.

Specify the length of time in seconds that must elapse before ending USB communication with a computer after the printer receives a print job from a PostScript printer driver or PCL printer driver. If the job ending is not clearly defined from a PostScript printer driver or PCL printer driver, it can cause endless USB communication. When this occurs, the printer ends communication after the specified time has elapsed. Enter 0 (zero) if you do not want to end communication.