Items |
Setting value and Description |
---|---|
Device Name |
Display the Device Name. To change the Device Name, enter the new Device Name in the text box. |
Location |
Enter the Location of the device. |
Obtain IP Address |
Select the IP Address setting method from Auto or Manual. If you select Manual, you will need to enter the IP address, subnet mask, and so on. |
Set using BOOTP |
You can specify whether or not to enable Set using BOOTP. |
Set using Automatic Private IP Addressing (APIPA) |
You can specify whether or not to enable Set using Automatic Private IP Addressing (APIPA). |
IP Address |
Enter the IP Address. Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx. Make sure that the IP Address is unique and does not conflict with any other device on the network. |
Subnet Mask |
Enter the Subnet Mask. Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx. |
Default Gateway |
Enter the Default Gateway. Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx. |
DNS Server Setting |
Select the DNS Server Setting method from Auto or Manual. Manual is selected when Obtain IP Address is set to Manual. |
Primary DNS Server |
Enter the Primary DNS Server. Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx. |
Secondary DNS Server |
Enter the Secondary DNS Server. Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx. |
DNS Host Name Setting |
Select the DNS Host Name Setting method from Auto or Manual. |
DNS Host Name |
Display the current DNS Host Name. |
DNS Domain Name Setting |
Select the DNS Domain Name setting method from Auto or Manual. |
DNS Domain Name |
Enter the DNS Domain Name according to the following rules.
The total number of characters of the host name and the domain name must not exceed 251. |
Register the network interface address to DNS |
You can specify whether or not to enable Register the network interface address to DNS. Enable if you want to register the host name and domain name with the DNS server through a DHCP server that supports dynamic DNS. If you select Enable, you will need to set the host name and domain name. |
Proxy Server Setting |
You can specify whether or not to use Proxy Server Setting. When this is selected, you need to configure the subsequent proxy server settings. |
Proxy Server |
Enter the address for the Proxy Server in IPv4 or FQDN format. |
Proxy Server Port Number |
Enter a number between 1 and 65535. |
Proxy Server User Name |
Enter the proxy server user name between 0 and 255 characters in ASCII (0x20-0x7E). |
Proxy Server Password |
Enter the proxy server password between 0 and 255 characters in ASCII (0x20-0x7E). |
IPv6 Setting |
You can specify whether or not to enable IPv6 Setting. |
IPv6 Privacy Extension |
You can specify whether or not to enable IPv6 Privacy Extension. |
IPv6 DHCP Server Setting |
You can specify whether or not to enable IPv6 DHCP Server Setting. |
IPv6 Address |
When using IPv6 Address, enter in the following format.
|
IPv6 Address Default Gateway |
When assigning IPv6 Address Default Gateway, enter in the following format. Enter in the following format.
|
IPv6 Link-Local Address |
Displays the valid IPv6 Link-Local Address. |
IPv6 Stateful Address |
Displays the valid IPv6 Stateful Address. |
IPv6 Stateless Address 1 |
Displays the valid IPv6 Stateless Address 1. |
IPv6 Stateless Address 2 |
Displays the valid IPv6 Stateless Address 2. |
IPv6 Stateless Address 3 |
Displays the valid IPv6 Stateless Address 3. |
IPv6 Primary DNS Server |
Enter the IPv6 primary DNS server in the following format.
|
IPv6 Secondary DNS Server |
When assigning IPv6 Secondary DNS Server, enter in the following format.
|
IEEE802.11k/v |
You can specify whether or not to enable IEEE802.11k/v. For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed. |
IEEE802.11r |
You can specify whether or not to enable IEEE802.11r. For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed. |