Configuring Basic SSL/TLS Settings

If the printer supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt communications. You can configure and manage the printer using Web Config while ensuring security.

Configure encryption strength and redirect feature.

  1. Enter the printer's IP address into a browser to access Web Config.

    Enter the printer's IP address from a computer that is connected to the same network as the printer.

    You can check the IP address of the printer from the following menu.

    Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select in the following order.

    Network Security tab > SSL/TLS > Basic

  4. Select a value for each item.

    • Encryption Strength
      Select the level of encryption strength.
    • Redirect HTTP to HTTPS
      Select enable or disable. The default value is "Enable".
    • TLS 1.0
      Select enable or disable. The default value is "Disable".
    • TLS.1.1
      Select enable or disable. The default value is "Disable".
    • TLS.1.2
      Select enable or disable. The default value is "Enable".
  5. Click Next.

    A confirmation message is displayed.

  6. Click OK.

    The printer is updated.