Creating the User Account

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Product Security tab > Access Control Settings > User Settings

4. Click Add for the number you want to register.

   Important:

   When using the printer with the authentication system of Epson or other companies, register the user name of the restriction setting in number 2 to number 10.

   Application software such as the authentication system uses number one, so that the user name is not displayed on the printer's control panel.

5. Set each item.

   • User Name :
     Enter the name displayed on the user name list between 1 and 14 characters long using alphanumeric characters.
   • Password :
     Enter a password between 0 and 20 characters long in ASCII (0x20-0x7E). When initializing the password, leave it blank.
   • Select the check box to enable or disable each function.
     Select the function that you permit to use.

6. Click Apply.

   Return to the user setting list after a specific length of time.

   Check that the user name you registered on User Name is displayed and changed Add to Edit.