Configuring an IEEE802.1X Network

When you set IEEE802.1X to the printer, you can use it on the network connected to a RADIUS server, a LAN switch with authentication function, or an access point.

TLS version 1.3 does not support this function.

  1. Enter the printer's IP address into a browser to access Web Config.

    Enter the printer's IP address from a computer that is connected to the same network as the printer.

    You can check the IP address of the printer from the following menu.

    Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select in the following order.

    Network Security tab > IEEE802.1X > Basic

  4. Enter a value for each item.

    If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.

    Note:

    You can share settings between Ethernet and Wi-Fi.

  5. Click Next.

    A confirmation message is displayed.

  6. Click OK.

    The printer is updated.