> Administrator Information > Managing the Printer > Setting the Control Panel

Setting the Control Panel

Setup for the printer's control panel. You can set up as follows.

  1. Enter the printer's IP address into a browser to access Web Config.

    Enter the printer's IP address from a computer that is connected to the same network as the printer.

    You can check the IP address of the printer from the following menu.

    Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select in the following order.

    Device Management tab > Control Panel

  4. Set up the following items as necessary.

    • Language
      Select the displayed language on the control panel.
    • Panel Lock
      If you select ON, the administrator password is required when you perform an operation that requires the administrator's authority. If the administrator password is not set, panel lock is disabled.
    • Operation Timeout
      If you select ON, when you log in as the access control user or administrator, you are automatically logged out and go to the initial screen if there is no activity for a certain period of time.
      You can set between 10 seconds and 240 minutes by the second.
    Note:

    You can also set up from the printer’s control panel.

    • Language : Settings > General Settings > Basic Settings > Language

    • Panel Lock : Settings > General Settings > System Administration > Security Settings > Admin Settings > Lock Setting

    • Operation Timeout : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or Off.)

  5. Click OK.