WF-C879R Series

User's Guide

> Using Optional Items > Ethernet Board (10/100/1000 Base-T, Ethernet) > Settings when Using an Additional Network > Connecting to the Network from the Control Panel (When Using an Additional Network) > Connecting to Ethernet (When Using an Additional Network) > Connecting to Ethernet on the Standard Network

Connecting to Ethernet on the Standard Network

Connect the printer to the standard network by using an Ethernet cable, and then check the connection.

  1. Connect the printer and hub (LAN switch) by Ethernet cable.

  2. Select Settings on the home screen.

  3. Select General Settings > Network Settings > Standard > Connection Check.

    The connection diagnosis result is displayed. Confirm the connection is correct.

  4. Tap OK to finish.

    When you tap Print Check Report, you can print the diagnosis result. Follow the on-screen instructions to print it.