Installing the Paper Cassette Units

1. Turn off the printer by pressing the button, and then unplug the power cord.

2. Disconnect any connected cables.

   Note:

   If other paper cassette units have been installed, uninstall them as well.

3. Remove the output tray.

   

4. Remove the paper cassette unit from its box, and then remove any protective materials.

5. Check the items supplied.

   

6. Place the paper cassette unit where you want to set up the printer.

7. Pull out the ink supply unit tray for black ink and the paper cassette.

   

8. If you use multiple paper cassette units, stack all paper cassette units on top of each other, and then secure them with the screws.

   

9. Lower the printer gently onto the paper cassette unit aligning the corners, and then secure them with the screws.

   
   Note:

   Some screws will be left over after assembly.

10. Secure the paper cassette unit and the printer at the back with the attachments and screws.

    

11. Insert a label showing the size of the paper to be loaded in the cassette into the holder.

    

12. Insert the ink supply unit tray for black ink and the paper cassette.

13. Place the sticker indicating the cassette number.

    

14. Insert the output tray.

    

15. Reconnect the power cord and any other cables, and then plug in the printer.

16. Turn on the printer by pressing the button.

17. Press the button, and check that the paper cassette unit that you installed is displayed on the Paper Setting screen.

    Note:

    When uninstalling the paper cassette unit, turn off the printer, unplug the power cord, disconnect any cables, and then perform the installation procedure in reverse.