Cleaning the ADF

When the copied or scanned images from the ADF are smeared or the originals do not feed in the ADF correctly, clean the ADF.

Important:

Never use alcohol or thinner to clean the printer. These chemicals can damage the printer.

  1. Open the ADF cover.

  2. Use a soft, moist cloth to clean the roller and the interior of the ADF.

    Important:
    • Using a dry cloth may damage the surface of the roller.

    • Use the ADF after the roller has dried.

  3. Close the ADF cover.

    Press the lever until it clicks.

  4. Open the document cover.

  5. Take the cleaning cloth from the cleaning cloth holder.

  6. Use the cleaning cloth to clean the part that is shown in the illustration.

    Important:
    • If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner and a soft cloth to remove it. Wipe off all remaining liquid.

    • Do not press the glass surface too hard.

    • Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.

  7. Return the cleaning cloth to the cleaning cloth holder.

  8. Close the document cover.