> Scanning > Scanning Originals to a Memory Device > Advanced Menu Options for Scanning to a Memory Device

Advanced Menu Options for Scanning to a Memory Device

Note:

The items may not be available depending on other settings you made.

Orientation (Original):

Select the orientation of the original.

Mixed Size Originals:

You can place the following combination of sizes in the ADF at the same time. A3 and A4; B4 and B5. When using these combinations, originals are scanned at the actual size of the originals. Place your originals by aligning the width of the originals as shown below.

Density:

Select the contrast of the scanned image.

Remove Shadow:

Remove the shadows of the original that appear in the scanned image.

  • Frame:

    Remove the shadows at the edge of the original.

  • Center:

    Remove the shadows of the binding margin of the booklet.

Remove Punch Holes:

Remove the punch holes that appear in the scanned image. You can specify the area to erase the punch holes by entering a value in the box on the right.

  • Erasing Position:

    Select the position to remove the punch holes.

  • Orientation (Original):

    Select the orientation of the original.

Continuous Scan(ADF):

You can place a large number of originals in the ADF in batches, and scan them as a single scanning job.

File Name:
  • Filename Prefix:

    Enter a prefix for the name of the images in alphanumeric characters and symbols.

  • Add Date:

    Add the date to the file name.

  • Add Time:

    Add the time to the file name.