Setting the Control Panel

1. Enter the IP address of the printer in the browser and start Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Device Management tab > Control Panel

4. Set up the following items as necessary.

   • Language
     Select the displayed language on the control panel.
   • Operation Timeout
     If you select ON, you go to the initial screen if there is no activity for a certain period of time.
     You can set between 10 seconds and 240 minutes by the second.
   Note:

   You can also set up from the printer’s control panel.

   • Language : Settings > General Settings > Basic Settings > Language

   • Operation Timeout : Settings > General Settings > Basic Settings > Operation Time Out (You can specify On or Off.)

5. Click OK.