Configuring the LDAP Server

To use the LDAP server information, register it on the printer.

  1. Enter the printer's IP address into a browser to access Web Config.

    Enter the printer's IP address from a computer that is connected to the same network as the printer.

    You can check the IP address of the printer from the following menu.

    Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select in the following order.

    Network tab > LDAP Server > Basic

  4. Enter a value for each item.

  5. Select OK.

    The settings you have selected are displayed.