Protocol Setting Items

Use Bonjour

Select this to search for or use devices through Bonjour.

Bonjour Name

Displays the Bonjour name.

Bonjour Service Name

Displays the Bonjour service name.

Location

Displays the Bonjour location name.

Top Priority Protocol

Select the top priority protocol for Bonjour print.

Wide-Area Bonjour

Set whether to use Wide-Area Bonjour.

Enable iBeacon Transmission

Select this to enable the iBeacon transmission function.

Enable SLP

Select this to enable the SLP function.

This is used such as network searching in EpsonNet Config.

Enable WSD

Select this to enable adding devices using WSD, and print from the WSD port. If you do not want this product to search for devices, disable this item and disable the Enable IPP item.

Printing Timeout (sec)

Enter the communication timeout value for WSD printing between 3 to 3,600 seconds.

Scanning Timeout (sec)

Enter the communication timeout value for WSD scanning between 3 to 3,600 seconds.

Device Name

Displays the WSD device name.

Location

Displays the WSD location name.

Enable LLTD

Select this to enable LLTD. The printer is displayed in the Windows network map.

Device Name

Displays the LLTD device name.

Enable LLMNR

Select this to enable LLMNR. You can use name resolution without NetBIOS even if you cannot use DNS.

Allow LPR Port Printing

Select to allow printing from the LPR port.

Printing Timeout (sec)

Enter the timeout value for LPR printing between 0 to 3,600 seconds. If you do not want to timeout, enter 0.

Allow RAW(Port9100) Printing

Select to allow printing from the RAW port (Port 9100).

Printing Timeout (sec)

Enter the timeout value for RAW (Port 9100) printing between 0 to 3,600 seconds. If you do not want to timeout, enter 0.

Allow RAW(Custom Port) Printing

Select to allow printing from the RAW port (custom port).

Port Number

Enter the port number for RAW printing between 1024 and 65535 (except for 9100, 1865, 2968).

Printing Timeout (sec)

Enter the timeout value for RAW (custom port) printing between 0 to 3,600 seconds. If you do not want to timeout, enter 0.

Enable IPP

Select to enable IPP communication. When enabled, you will be able to print over the Internet. It is also displayed when searching for devices on the network. Only printers that support IPP are displayed.

Allow Non-secure Communication

Select Allowed to allow the printer to communicate without any security measures (IPP).

Communication Timeout (sec)

Enter the timeout value for IPP printing between 0 to 3,600 seconds.

Require PIN Code when using IPP printing

Select whether or not to require a PIN code when using IPP printing. If you select Yes, IPP print jobs without PIN codes are not saved in the printer.

URL(Network)

Displays IPP URLs (http and https) when the printer is connected to the network. The URL is a combined value of the printer’s IP address, Port number, and IPP printer name.

URL(Wi-Fi Direct)

Displays IPP URLs (http and https) when the printer is connected by Wi-Fi Direct. The URL is a combined value of the printer’s IP address, Port number, and IPP printer name.

Printer Name

Displays the IPP printer name.

Location

Displays the IPP location.

Enable FTP Server

Select to enable FTP printing. Only printers that support FTP printing are displayed.

Communication Timeout (sec)

Enter the timeout value for FTP communication between 0 to 3,600 seconds. If you do not want to timeout, enter 0.

Enable SNMPv1

SNMPv1 is enabled when the box is checked.

Enable SNMPv2c

SNMPv2c is enabled when the box is checked.

Access Authority

Set the access authority when SNMPv1 or SNMPv2c is enabled. Select Read Only or Read/Write.

Community Name (Read Only)

Enter 0 to 32 ASCII (0x20 to 0x7E) characters.

Community Name (Read/Write)

Enter 0 to 32 ASCII (0x20 to 0x7E) characters.

Allow access from Epson tools

Set whether or not to allow information to be written by Epson tools such a Epson Device Admin.

Enable SNMPv3

SNMPv3 is enabled when the box is checked.

User Name

Enter between 1 and 32 characters using 1 byte characters.

Authentication Settings

Algorithm

Select an algorithm for an authentication for SNMPv3.

Password

Enter the password for an authentication for SNMPv3.

Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank.

Confirm Password

Enter the password you configured for confirmation.

Encryption Settings

Algorithm

Select an algorithm for an encryption for SNMPv3.

Password

Enter the password for an encryption for SNMPv3.

Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank.

Confirm Password

Enter the password you configured for confirmation.

Context Name

Enter within 32 characters or less in Unicode (UTF-8). If you do not specify this, leave it blank. The number of characters that can be entered varies depending on the language.