WF-M5899 Series

User's Guide

> Preparing the Printer and Making Initial Settings > Settings for Printing, Scanning, Copying and Faxing > Initial Settings for Printing > Setting the Interface

Setting the Interface

Set the timeout of the print jobs or printing language assigned to each interface.

This item is displayed on the PCL or PostScript compatible printer.

Enter the printer's IP address into a browser to access Web Config.

Enter the printer's IP address from a computer that is connected to the same network as the printer.

You can check the IP address of the printer from the following menu.

Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select in the following order.

Print tab > Interface Settings
Set each item.
- Timeout Settings
  
  Set the timeout of the print jobs sent directly via USB.
  
  You can set between 5 and 300 seconds by the second.
  
  When you do not want to timeout, enter 0.
- Printing Language
  
  Select the printing language for each USB interface and network interface.
  
  When you select Auto, the printing language is automatically detected by the print jobs being sent.
Check the settings, and then click OK.