You can find the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Basic Settings
Note:
On the Web Config screen, you can find the menu below.
Fax tab > Basic Settings
Basic Settings
Fax Speed
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP (VoIP) phone service.
ECM
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by telephone line noise. If this is disabled, you cannot send documents in color.
Dial Tone Detection
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the Line Type setting to PBX. If this does not work, disable this feature. However, disabling this feature may drop the first digit of a fax number and send the fax to the wrong number.
Dial Mode
Select the type of phone system to which you have connected the printer. When set to Pulse, you can temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered) while entering numbers on the fax top screen. This setting may not be displayed depending on your region or country.
Line Type
Select the line type to which you have connected the printer.
PSTN
Select PSTN when the printer is connected to a public switched telephone network.
PBX
Select
PBX when using the printer in an environment that uses extensions and requires an external access code, such as 0 and 9, to get an outside line. For an environment that uses a DSL modem or terminal adapter, setting to
PBX is also recommended.
Access Code
Select Use, and then register an external access code such as 0 or 9. Then, when sending a fax to an outside fax number, enter # (hash) instead of the real code. # (hash) must also be used in Contacts as an external access code. If an external access code such as 0 or 9 is set in a contact, you cannot send faxes to the contact. In this case, set Access Code to Do Not Use, otherwise you must change the code in Contacts to #.
Header
Enter your sender name and fax number. These appear as a header on outgoing faxes.
Your Phone Number
You can enter up to 20 characters using 0-9 + or space. For Web Config, you can enter up to 30 characters.
Fax Header
You can register up to 21 sender names as necessary. You can enter up to 40 characters for each sender name. For Web Config, enter the header in Unicode (UTF-8).
If you have subscribed to a distinctive ring service from your telephone company, select the ring pattern to be used for incoming faxes. The distinctive ring service, offered by many telephone companies (the service name differs by company), allows you to have several phone numbers on one phone line. Each number is assigned different ring pattern. You can use one number for voice calls and another for fax calls. Depending on the region, this option may be On or Off.
Rings to Answer
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start receiving the fax by entering the code using the phone.
Start Code
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax
Rejection Fax
Select options to reject receiving junk faxes.
Rejection Number List
If the other party's phone number is in the rejection number list, set whether to reject the incoming faxes.
Fax Header Blank
If the other party's phone number is blocked, set whether to reject receiving the faxes.
Unregistered Contacts
If the other party's phone number is not in the contacts, set whether to reject receiving the faxes.
Edit Blocked Number list
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters using 0-9, *, #, or space.
Save/Forward File Format
Save/Forward File Format
Select the format that you want to use for saving or forwarding faxes from PDF or TIFF.
PDF Settings
Selecting PDF in Save/Forward File Format enables the settings.
Document Open Password
Password Setting:
Enables to set a document open password.
Password:
Set a document open password.
Permissions Password
Password Setting
Enables to set a password for printing or editing in a PDF file.
Password
Set a permission password in Password.
Printing
Allows printing the PDF file.
Editing
Allows editing the PDF file.
Cloud Destination List
When using Epson Connect, you can register up to five addresses to the cloud service that is being administered by Epson Connect. You can upload document data as a file when forwarding faxes by specifying the registered address as a destination.
You may not be able to use online services depending on the country and region.