Network Setting Items

Device Name

Display the Device Name. To change the Device Name, enter the new Device Name in the text box.

Location

Enter the Location of the device.

Obtain IP Address

Select the IP Address setting method from Auto or Manual. If you select Manual, you will need to enter the IP address, subnet mask, and so on.

Set using BOOTP

You can specify whether or not to enable Set using BOOTP.

Set using Automatic Private IP Addressing (APIPA)

You can specify whether or not to enable Set using Automatic Private IP Addressing (APIPA).

IP Address

Enter the IP Address.

Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx.

Make sure that the IP Address is unique and does not conflict with any other device on the network.

Subnet Mask

Enter the Subnet Mask.

Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx.

Default Gateway

Enter the Default Gateway.

Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx.

DNS Server Setting

Select the DNS Server Setting method from Auto or Manual. Manual is selected when Obtain IP Address is set to Manual.

Primary DNS Server

Enter the Primary DNS Server.

Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx.

Secondary DNS Server

Enter the Secondary DNS Server.

Enter in the format xxx.xxx.xxx.xxx. Enter a number from 0 to 255 for xxx.

DNS Host Name Setting

Select the DNS Host Name Setting method from Auto or Manual.

DNS Host Name

Display the current DNS Host Name.

DNS Domain Name Setting

Select the DNS Domain Name setting method from Auto or Manual.

DNS Domain Name

Enter the DNS Domain Name according to the following rules.

• Enter between 2 and 249 characters using "A-Z", "a-z", "0-9", hyphen "-", and a period ".".

• "0-9", hyphen "-", and a period "." cannot be the first character.

• A hyphen "-", and a period "." cannot be the last character.

• Each label in the domain name must be between 1 and 63 characters and separated by a period.

The total number of characters of the host name and the domain name must not exceed 251.

Register the network interface address to DNS

You can specify whether or not to enable Register the network interface address to DNS.

Enable if you want to register the host name and domain name with the DNS server through a DHCP server that supports dynamic DNS.

If you select Enable, you will need to set the host name and domain name.

Proxy Server Setting

You can specify whether or not to use Proxy Server Setting. When this is selected, you need to configure the subsequent proxy server settings.

Proxy Server

Enter the address for the Proxy Server in IPv4 or FQDN format.

Proxy Server Port Number

Enter a number between 1 and 65535.

Proxy Server User Name

Enter the proxy server user name between 0 and 255 characters in ASCII (0x20-0x7E).

Proxy Server Password

Enter the proxy server password between 0 and 255 characters in ASCII (0x20-0x7E).

IPv6 Setting

You can specify whether or not to enable IPv6 Setting.

IPv6 Privacy Extension

You can specify whether or not to enable IPv6 Privacy Extension.

IPv6 DHCP Server Setting

You can specify whether or not to enable IPv6 DHCP Server Setting.

IPv6 Address

When using IPv6 Address, enter in the following format.

• xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx / prefix

• xxxx is a hexadecimal number from 1 to 4 digits, and the prefix is a decimal number from 1 to 128.

• If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::. (Only one place).

IPv6 Address Default Gateway

When assigning IPv6 Address Default Gateway, enter in the following format.

Enter in the following format.

• xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx

• xxxx is a hexadecimal number from 1 to 4 digits.

• If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::. (Only one place).

IPv6 Link-Local Address

Displays the valid IPv6 Link-Local Address.

IPv6 Stateful Address

Displays the valid IPv6 Stateful Address.

IPv6 Stateless Address 1

Displays the valid IPv6 Stateless Address 1.

IPv6 Stateless Address 2

Displays the valid IPv6 Stateless Address 2.

IPv6 Stateless Address 3

Displays the valid IPv6 Stateless Address 3.

IPv6 Primary DNS Server

Enter the IPv6 primary DNS server in the following format.

• xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx

• xxxx is a hexadecimal number from 1 to 4 digits.

• If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::. (Only one place).

IPv6 Secondary DNS Server

When assigning IPv6 Secondary DNS Server, enter in the following format.

• xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx

• xxxx is a hexadecimal number from 1 to 4 digits.

• If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::. (Only one place).

IEEE802.11k/v

You can specify whether or not to enable IEEE802.11k/v.

For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed.

IEEE802.11r

You can specify whether or not to enable IEEE802.11r.

For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed.