Fax Settings

Assigning up to three frequently used items such as Transmission Log and Original Type in Settings > General Settings > Fax Settings > Quick Operation Button, displays the items at the top of the Fax Settings tab.

Select the resolution of the outgoing fax. If you select a higher resolution, the data size becomes larger and it takes time to send the fax.

Sets the density of the outgoing fax. + makes the density darker, and - makes it lighter.

Select the type of your original.

Detects the paper color (background color) of the original document, and removes or lightens the color. Depending on the darkness and vividness of the color, it may not be removed or lightened

Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the sharpness.

Scans both sides of originals placed in the ADF and sends a monochrome fax.

Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document at their original sizes.

Sending Different Size Documents Using ADF (Continuous Scan(ADF))

Select the size and orientation of the original you placed on the scanner glass.

Select whether to scan in color or in monochrome.

Sends a monochrome fax while scanning the originals. Since scanned originals are not stored temporarily in the printer's memory even when sending a large volume of pages, you can avoid printer errors due to a lack of memory. Note that sending using this feature takes longer than not using this feature.

You cannot use this feature when:

• Sending a fax using the ADF 2-Sided option

• Sending a fax to multiple recipients

Sending Many Pages of a Monochrome Document (Direct Send)

Sends the current fax before other faxes waiting to be sent.

Sending a Fax Preferentially (Priority Send)

Sends a fax at a time you specified. Only a monochrome fax is available when using this option.

Sending Faxes in Monochrome at Specified Time of the Day (Send Fax Later)

• Add Sender Information

  Select the position where you want to include the header information (sender name and fax number) in the outgoing fax, or not to include the information.

  - Off: Sends a fax with no header information.

  - Outside of Image: Sends a fax with header information in the top white margin of the fax. This keeps the header from overlapping with the scanned image, however, the fax received by the recipient may be printed across two sheets depending on the size of the originals.

  - Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the scanned image. The header may overlap with the image, however, the fax received by the recipient will not be split into two documents.

• Fax Header

  Select the header for the recipient. To use this feature, you should register multiple headers in advance.

• Additional Information

  Select the information you want to add. You can select one from Your Phone Number, Destination List, and None.

Sends a notification after you send a fax.

Select a recipient from the contacts list to send a notification after you have sent a fax.

Prints a transmission report after you send the fax.

Print on Error prints a report only when an error occurs.

When Attach Fax image to report has been set in Settings > General Settings > Fax Settings > Report Settings, faxes with errors are also printed with the report.

Saves a backup of the sent fax that is scanned and saved to the printer's memory automatically. The backup feature is available when:

• Sending a fax in monochrome

• Sending a fax using the Send Fax Later feature

• Sending a fax using the Batch Send feature

• Sending a fax using the Store Fax Data feature

Select one of the following options, and then select a destination.

• Email

• Network Folder/FTP

• Cloud