WF-M5899 Series

User's Guide

> Preparing the Printer and Making Initial Settings > Settings for Printing, Scanning, Copying and Faxing > Initial Settings for Printing > Setting Errors

Setting Errors

Set the displaying error for the device.

Enter the printer's IP address into a browser to access Web Config.

Enter the printer's IP address from a computer that is connected to the same network as the printer.

You can check the IP address of the printer from the following menu.

Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select in the following order.

Print tab > Error Settings
Set each item.
- Paper Size Notice
  
  Set whether to display an error on the control panel when the paper size of the specified paper source is different from the paper size of the print data.
- Paper Type Notice
  
  Set whether to display an error on the control panel when the paper type of the specified paper source is different from the paper type of the print data.
- Auto Error Solver
  
  Set whether to automatically cancel the error if there is no operation on the control panel for 5 seconds after displaying the error.
Check the settings, and then click OK.