This section describes how to make settings from the printer's control panel.
Select Settings on the printer's home screen.
Select Network Settings > Advanced > TCP/IP.
Select Obtain IP Address, and then select Manual.
Enter the IP address.
Focus moves to the forward segment or the back segment separated by a period if you select 
and 
.
Confirm the value reflected on the previous screen.
Set up the Subnet Mask and Default Gateway.
Confirm the value reflected on the previous screen.
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, you cannot proceed with the settings. Confirm that there is no error in the entry.
Enter the IP address for the primary DNS server.
Confirm the value reflected on the previous screen.
When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address. Then, enter the secondary DNS server address directly. If you select Auto, go to step 8.
Enter the IP address for the secondary DNS server.
Confirm the value reflected on the previous screen.
Select Start Setup.