Select the menus on the control panel as described below.
Settings > Network Settings
Set up or change wireless network settings. Choose the connection method from following and then follow the instructions on the control panel.
Makes Wi-Fi settings by entering the SSID and password.
Makes Wi-Fi settings by Push Button Setup (WPS).
Makes Wi-Fi settings by PIN Code Setup (WPS).
Makes Wi-Fi settings by using the Wi-Fi information on the computer or smart device.
Disables Wi-Fi. Infrastructure connections will be disconnected.
Reads the QR code from your iPhone, iPad, or iPod touch to connect using Wi-Fi Direct.
Makes Wi-Fi Direct settings by entering the SSID and password.
Changes the Wi-Fi Direct SSID (network name).
Changes the password for the Wi-Fi Direct connection.
Disables the Wi-Fi Direct function.
Restores the Wi-Fi Direct settings.
Displays the printer's Wi-Fi information.
Displays the Wi-Fi Direct setting information.
Prints a network status sheet.
The information for Wi-Fi, Wi-Fi Direct, and so on is printed on two or more pages.
Checks the current network connection and prints a report. If there are any problems with the connection, see the report to solve the problem.
Changes the device name to any name within 2 to 15 characters.
Configures the IP settings, if the IP address is static.
For automatic configuration, use the IP address assigned by DHCP.
To set manually, switch to "Manual" and then enter the IP address you want to assign.
Set this if you are using a proxy server in your network environment and want to set it for the printer as well.
(Menu)