Replacing Ink Cartridges (When Ink Light is On or Flashing)

1. Open the printer cover.

   

2. Operate the printer's buttons to move the ink cartridge holder.

   Note:

   Replace the cartridge that stops at the icon. If there are more expended ink cartridges, the cartridge moves to the icon every time you press the button.

   
   • If the light is on (one or more ink cartridges are expended)
     Press the button. The ink cartridge holder moves to the icon. You cannot replace cartridges in this position. Go to the next step.
   • If the light flashes (one or more ink cartridges are running low)
     Press the button. The ink cartridge holder moves to the icon. You cannot replace cartridges in this position. Go to the next step.
   Note:

   To cancel ink cartridge replacement, keep the ink cartridges installed and turn off the printer.

3. Press the button again.

   The ink cartridge holder moves to the replacement position.

   

4. Take the new ink cartridge from its package.

   
   Important:

   Do not shake cartridges after opening the package, as they may leak.

5. Lift the ink cartridge cap and remove it.

   
   Important:

   Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.

   

6. Press the tab to remove the ink cartridge, and lift it diagonally to remove it.

   

7. Insert the new ink cartridge diagonally from the tip side and push it gently. You will hear a "click" when it is inserted correctly.

   

8. Close the printer cover.

   

9. Ink charging starts.

   Important:

   After installing the ink cartridge, the power and ink light will continues to flash while the printer is charging ink. Do not turn off the printer during ink charging. Charging takes approximately two minutes. If the ink charging is incomplete, you may not be able to print.

   Note:

   If the light does not turn off, try removing and reinserting the ink cartridge.