Select the menus on the control panel as described below.
Settings > Printer Settings
Printer Settings
Paper Source Setting
Paper Setup
Select the paper size and paper type you loaded in the paper source. You can make Favorite Paper Settings in paper size and paper type.
Paper Configuration
Select On to display the paper settings screen automatically by referring to Settings > Printer Settings > Paper Source Setting > Paper Setup when paper is loaded in the paper source. If you disable this feature, you cannot print from an iPhone, iPad or iPod touch using AirPrint.
CD/DVD
Adjusts the printing position of a CD/DVD by moving up, down, left, or right to fit.
CD Inner/Outer
Adjusts the printing position of the inner and outer diameters of a CD/DVD. Up to 120 mm for the outer diameter, and a minimum of 18 mm for the inner diameter can be specified. Depending on the setting, the CD/DVD or CD/DVD tray may get dirty. Set the range to fit the printable area of your CD/DVD. The print area set here is the initial value when printing photos from a memory card onto a CD/DVD.
Stickers
Adjusts the printing position of a photo sticker by moving up, down, left, or right to fit.
Thick Paper
Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.
Quiet Mode
Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level.
Ink Drying Time
Select the ink drying time you want to use when performing 2-sided printing. The printer prints the other side after printing one side. If your printout is smeared, increase the time setting.
Bidirectional
Select On to change the print direction; Prints while the print head moves to the left and to the right. If vertical or horizontal ruled lines on your printout look blurred or misaligned, disabling this feature may solve the problem; however, doing so may reduce print speed.