Part Names and Functions

Rear paper feed slot

Load one sheet of paper at a time by hand.

Rear paper feed slot cover

Prevents foreign substances from entering the printer. This cover should usually be closed.

Edge guide

Feeds the paper straight into the printer. Slide to the edges of the paper.

CD/DVD tray slot

Insert the CD/DVD tray with a printable CD/DVD placed on it into this slot. The slot is located between the and the output tray.

CD/DVD tray

When printing on a CD/DVD, remove this from the bottom of the paper cassette 2, place a CD/DVD, and insert it into the CD/DVD tray slot.

When not printing on a CD/DVD, store it in the bottom of the paper cassette 2 without placing a CD/DVD.

Scanner unit

Scans placed originals. Open to replace the ink cartridges or to remove jammed paper. This unit should usually be kept closed.

Ink cartridge holder

Install the ink cartridges. Ink is ejected from the print head nozzles underneath.

Maintenance box cover

Remove when replacing the maintenance box. The maintenance box is a container that collects a very small amount of surplus ink during cleaning or printing.

Control panel

Indicates the printer's status and allows you to make print settings.

You can change the angle of the control panel.

(Power button/light)

Turns the printer on or off.

Unplug the power cord after checking that the power light is off.

Front cover

Open to load paper in the paper cassette.

Output tray

Holds the ejected paper. When you start printing, this tray is ejected automatically. If you tap Yes on the screen displayed when the printer is turned off, it is stored automatically. To store the tray manually, tap on the home screen.

Paper cassette 1

Loads paper.

Paper cassette 2

Edge guide

Feeds the paper straight into the printer. Slide to the edges of the paper.

Paper guide extension

Slide out to load paper larger than A4 size.

Document cover

Blocks external light while scanning.

Scanner glass

Place the originals.

SD card slot

Insert a memory card.

External interface USB port

Connects an external storage device or a PictBridge capable device.

AC inlet

Connects the power cord.

Rear cover

Remove when removing jammed paper.

USB port

Connects a USB cable to connect with a computer.