Copying on a CD/DVD Label

You can copy a disc label or a square original such as a photo onto a CD/DVD label.

Important:

• Before printing on the CD/DVD, see the CD/DVD handling precautions.

  CD/DVD Handling Precautions

• Do not insert the CD/DVD tray while the printer is operating. This may damage the printer.

• Do not insert the CD/DVD tray until you are instructed to do so. Otherwise, an error occurs and the CD/DVD is ejected.

1. Select Various Prints on the control panel.

2. Select Copy to CD/DVD > Copy to CD/DVD.

3. Place the original following the instructions displayed on the screen, and then select Proceed to set up Outer/Inner..

   If the CD/DVD is not placed exactly in the center, the positioning is automatically adjusted.

4. Specify the inner diameter and the outer diameter using , and then select Select Type.

   You can also select within the frame of the inner diameter and outer diameter, and then enter the value using the on-screen keypad.

   Note:

   • You can set 114 to 120 mm as the outer diameter, and 18 to 46 mm as the inner diameter in 1 mm increments.

   • The outer diameter and the inner diameter you set are restored to their defaults after printing the disc label. You need to set these diameters every time you print.

   Menu Options for Copy to CD/DVD

5. Select Print on CD/DVD.

   Note:

   To make a test print, select Test print on A4 paper, and then load A4 plain paper in the paper cassette. You can check the printout image before printing on a CD/DVD label.

6. When the message is displayed on the screen telling you to load a CD/DVD, select How To, and then follow the on-screen instructions to load a CD/DVD.

   Important:

   Place a CD/DVD on the CD/DVD tray with the printable side facing up. Press the center of the CD/DVD to securely set it on the CD/DVD tray. Otherwise, the CD/DVD may fall off the tray. Turn over the tray to check that the CD/DVD is firmly secured in the tray.

   
   Note:

   You may feel slight friction when inserting the tray into the printer. This is normal and you should continue to insert it horizontally.

7. Select Installed.

8. Select the Print on CD/DVD tab, select color copy or monochrome copy, and then change the copy density as necessary.

   Note:

   Select to view the scanned image. You can adjust the printing position on the preview screen.

   Menu Options for Copy to CD/DVD

9. Select the Advanced Settings tab, and then change the settings as necessary.

   Menu Options for Copy to CD/DVD

10. Select the Print on CD/DVD tab, and then tap .

11. When printing has finished, the CD/DVD tray is ejected. Remove the tray from the printer, and then follow the on-screen instructions to select Printing Complete.

    Important:

    After printing is finished, make sure you remove the CD/DVD tray. If you do not remove the tray and turn the printer on or off, or run head cleaning, the CD/DVD tray will strike the print head and may cause the printer to malfunction.

12. Remove the CD/DVD and store the CD/DVD tray on the bottom of the paper cassette 2.