This section describes how to configure settings from the printer's control panel.
Select Settings on the printer's home screen.
Select Network Settings > Advanced > TCP/IP.
Select Obtain IP Address, and then select Manual.
Enter the IP address.
Select the 
or 
icon to move the focus between the IP address segments.
Enter the Subnet Mask and Default Gateway.
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, you cannot proceed with setup. Make sure there are no errors in the entries.
Enter the IP address for the primary DNS server.
When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address. Then, enter the secondary DNS server address directly. If you select Auto, go to step 8.
Enter the IP address for the secondary DNS server.
Tap Start Setup.