Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
Do one of the following.
When the following window is displayed, select Print in Black.
When the following window is displayed, cancel printing. And then, printing again.
If you cannot cancel printing from the computer, cancel using the printer's control panel.
Follow the steps below when printing again.
Access the printer driver window.
Clear Borderless on the Main tab.
Select plain papers or Envelope as the Paper Type setting on the Main tab.
Select Grayscale.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
Click Print.
Click Print in Black in the window displayed.