Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
By selecting a fax-capable printer from the Print menu of a commercially available application, you can send data such as documents, drawings, and tables, you have created.
The following explanation uses Text Edit, a standard Mac OS application as an example.
Create the document you want to send by fax in an application.
Click Print from the File menu.
The application’s Print window is displayed.
Select your printer (fax name) in Name, click to display the detailed settings, check the print settings, and then click OK.
Make settings for each item.
The page size of documents you can send is the same as the paper size you can fax from the printer.
Select Fax Settings from the popup menu, and then make settings for each item.
See the PC-FAX driver's help for explanations on each setting item.
Click at the bottom left of the window to open the PC-FAX driver's help.
Select the Recipient Settings menu, and then specify the recipient.
If your printer's Line Type is set to PBX and the access code has been set to use # (hash) instead of entering the exact prefix code, enter # (hash). For details, see Line Type in Basic Settings from Related Information link below.
If your printer's Line Type is set to PBX and the access code has been set to use # (hash) instead of entering the exact prefix code, enter # (hash). For details, see Line Type in Basic Settings from Related Information link below.
Check the recipient settings, and then click Fax.
Sending starts.
Make sure the name and fax number of the recipient are correct before transmitting.
If you click the printer icon in Dock, the transmission status check screen is displayed. To stop sending, click the data, and then click Delete.
If an error occurs during transmission, the Sending failed message is displayed. Check the transmission records on the Fax Transmission Record screen.
Mixed paper size documents may not be sent correctly.