Network Service and Software Information
Application for Scanning Documents and Images (Epson Scan 2)
Application for Configuring Scanning Operations from the Control Panel (Epson Event Manager)
Application for Configuring Fax Operations and Sending Faxes (FAX Utility)
Application for Quick and Fun Printing from a Computer (Epson Photo+)
Application for Easily Operating the Printer from a Smart device (Epson Smart Panel)
Application for Updating Software and Firmware (Epson Software Updater)
Application for Setting up the Device on a Network (EpsonNet Config)
Colored Banding Appears at Intervals of Approximately 2.5 cm
The Position, Size, or Margins of the Printout Are Incorrect
Uneven Colors, Smears, Dots, or Straight Lines Appear in the Copied Image
An Image of the Reverse Side of the Original Appears in the Copied Image
The Text or Image Copied from the ADF is Squeezed or Stretched
Check the following.
Network devices such as a wireless router, hub, and router are turned on.
The TCP/IP Setup for network devices has not been set up manually. (If the printer’s TCP/IP Setup is set automatically while the TCP/IP Setup for other network devices is performed manually, the printer’s network may differ from the network for other devices.)
If it still does not work after checking the above, try the following.
Turn off the wireless router. Wait for about 10 seconds, and then turn it on.
Make network settings on the computer that is on the same network as the printer using the installer. You can run it from the following website.
http://epson.sn > Setup
You can register several passwords on a wireless router that uses the WEP security type. If several passwords are registered, check if the first registered password is set on the printer.