Registering a Destination to Contacts from Web Config

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Scan/Copy or Fax tab > Contacts

4. Select the number that you want to register, and then click Edit.

5. Enter Name and Index Word.

6. Select the destination type as the Type option.

   Note:

   You cannot change the Type option after registration is complete. If you want to change the type, delete the destination and then register again.

7. Enter a value for each item, and then click Apply.