|
Item |
Settings and Descriptions |
|---|---|
|
Use VoIP Gateway |
Select whether to enable or disable sending and receiving IP faxes through the VoIP gateway. |
|
Your Phone Number |
Set the fax number you want to use when sending IP faxes to G3 fax-compatible devices using a VoIP gateway. This appears as a header on outgoing faxes. You can enter up to 20 characters using 0-9 + or spaces. |
|
Main Unit URI |
Make the following settings. sip:<<Fax number for IP fax>>* @<<Host name or IP address of the printer>> |
|
SIP RX Port Number |
Enter the port number for receiving incoming SIP packets using single-byte numbers within a range of 1 to 65535. |
|
SIP TX Transport |
Select the protocol to be used when sending outgoing SIP requests from UDP or TCP. |
|
Registered VoIP Gateway |
Register the VoIP gateway you want to connect to. See the following for more information. |
|
VoIP Gateway Priority Settings |
Set priorities for the VoIP gateways you want to connect to. See the following for more information. |
*: This fax number is the fax number of the printer used to send and receive G3 faxes. Register the fax number to the VoIP gateway in advance.
Media (T.38) Settings
|
Item |
Settings and Descriptions |
|---|---|
|
T.38 TX Transport |
After establishing a SIP session, displays the UDPTL which is the protocol to be used when sending and receiving data. |
|
T.38 Media Type |
After establishing a SIP session, displays the image which is the type of media stream to be used when sending and receiving data. |
|
T.38 RX Port Number |
Enter the port number for receiving T.38 data using single-byte numbers within a range of 1 to 65535. |
|
RTP RX Port Number |
Enter the port number for receiving RTP (Real-time Transport Protocol) data using single-byte numbers within a range of 1024 to 65534. |