Setting the Interface

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Print tab > Interface Settings

4. Set each item.

   • Timeout Settings
     Set the timeout of the print jobs sent directly via USB.
     You can set between 5 and 300 seconds by the second.
     When you do not want to timeout, enter 0.
   • Printing Language
     Select the printing language for each USB interface and network interface.
     When you select Auto, the printing language is automatically detected by the print jobs being sent.

5. Check the settings, and then click OK.