> Preparing the Printer and Making Initial Settings > Preparing and Setting Up the Printer According to Use > Contacts Registration > Registering Destinations to Contacts (When Optional Fax Boards are Installed) > Registering a Recipient to the Contacts from Web Config (When Optional Fax Boards Installed)

Registering a Recipient to the Contacts from Web Config (When Optional Fax Boards Installed)

When registering a recipient to the contacts list, you can also add the line setting.

Enter the printer's IP address into a browser to access Web Config.

Enter the printer's IP address from a computer that is connected to the same network as the printer.

You can check the IP address of the printer from the following menu.

Settings > General Settings > Network Settings > (Standard) > Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select in the following order.

Scan/Copy tab or the Fax tab > Contacts
Select the number that you want to register, and then click Edit.
Enter the Name and Index Word.
Select Fax as the Type option.

Note:

You cannot change the Type option after registration is complete. If you want to change the type, delete the destination and then register again.
Select a line in Select Line, and then click Apply.

Note that Select Line is set to G3-Auto by default.

You can also add the recipient to the contacts list.

AM-C6000 Series/AM-C5000 Series/AM-C4000 Series