Configure the Client Certificate for IEEE802.1X. When you set it, you can use EAP-TLS and PEAP-TLS as an authentication method of IEEE802.1x. If you want to configure the certification authority certificate, go to CA Certificate.
Enter the printer's IP address into a browser to access Web Config.
Enter the IP address of the network (standard/additional) you want to configure from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > (Standard or Additional) > Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select in the following order.
Network Security tab > IEEE802.1X > Client Certificate
Enter a certificate in the Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate and use it in IEEE802.1X. To copy, select the certificate from Copy From, and then click Copy.