Power Saving Settings During Inactivity

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Device Management tab > Power Saving

4. Set up the following items as necessary.

   • Sleep Timer
     Enter the time to switch power saving mode when inactivity occurs.
   Note:

   You can also set up from the printer’s control panel.

   Settings > General Settings > Basic Settings > Sleep Timer

   • Power Off Timer or Power Off If Inactive
     Select a time to automatically turn off the printer after it has been inactive for a specific time. When you are using the fax features, select None or Off.
   Note:

   You can also set up from the printer’s control panel.

   Settings > General Settings > Basic Settings > Power Off Timer or Power Off Settings

   • Power Off If Disconnected
     Select this setting to turn the printer off after a specified period of time when all ports including the LINE port are disconnected. This feature may not be available depending on your region.
     See the following website for the specified period of time.
     https://www.epson.eu/energy-consumption
   Note:

   You can also set up from the printer’s control panel.

   Settings > General Settings > Basic Settings > Power Off Settings >Power Off If Disconnected

5. Click OK.