|
Item |
Settings and Descriptions |
|---|---|
|
Use VoIP Gateway |
Select whether to enable or disable sending and receiving IP faxes through the VoIP gateway. |
|
Your Phone Number |
Set the fax number you want to use when sending IP faxes to G3 fax-compatible devices using a VoIP gateway. This appears as a header on outgoing faxes. You can enter up to 20 characters using 0-9 + or spaces. |
|
Main Unit URI |
Make the following settings. sip:<<Fax number for IP fax>>* @<<Host name or IP address of the printer>> |
|
SIP RX Port Number |
Enter the port number for receiving incoming SIP packets using single-byte numbers within a range of 1 to 65535. |
|
SIP TX Transport |
Select the protocol to be used when sending outgoing SIP requests from UDP or TCP. |
*: This fax number is the fax number of the printer used to send and receive G3 faxes. Register the fax number to the VoIP gateway in advance.
Registered VoIP Gateway
Select the item that you want to register or edit the VoIP gateway setting, and then click Edit. See the following for more information.
Registering a VoIP Gateway <Epson Device Admin>
|
Item |
Settings and Descriptions |
|---|---|
|
ID |
Displays the registration ID of the VoIP gateway. |
|
Name |
Displays the name of the VoIP gateway. |
|
IP Address |
Displays the host name or IP address of the VoIP gateway. |
|
Port Number |
Displays the port number of the VoIP gateway. |
VoIP Gateway Priority Settings
Set the sending conditions and the priorities for the VoIP gateway used to send and receive IP faxes. See the following for more information.
Setting up Sending Conditions for VoIP Gateways <Epson Device Admin>
Setting up Priorities for VoIP Gateways <Epson Device Admin>
|
Item |
Settings and Descriptions |
|---|---|
|
Priority |
Displays the priorities of the VoIP gateway. |
|
VoIP Gateway(ID) |
Displays the registration ID of the VoIP gateway registered in the Registered VoIP Gateway list. |
|
Conditions |
Displays the initial destination fax number (the sending conditions for the VoIP gateway). |
Media (T.38) Settings
|
Item |
Settings and Descriptions |
|---|---|
|
T.38 RX Port Number |
Enter the port number for receiving T.38 data using single-byte numbers within a range of 1 to 65535. |
|
RTP RX Port Number |
Enter the port number for receiving RTP (Real-time Transport Protocol) data using single-byte numbers within a range of 1024 to 65534. |