Configuring Wired LAN Settings

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the IP address of the network (standard/additional) you want to configure from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard or Additional) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Network tab >Wired LAN

4. Set each item.

   • Link Speed & Duplex
     Select the communication mode from the list.
   • IEEE 802.3az
     You can specify whether or not to enable IEEE 802.3az.

5. Click Next.

   A confirmation message is displayed.

6. Click OK.

   The printer is updated.