When you set IEEE802.1X to the printer, you can use it on the network connected to a RADIUS server, a LAN switch with authentication function, or an access point.
TLS version 1.3 does not support this function.
Enter the printer's IP address into a browser to access Web Config.
Enter the IP address of the network (standard/additional) you want to configure from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > (Standard or Additional) > Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select in the following order.
Network Security tab > IEEE802.1X > Basic
Enter a value for each item.
If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
You can share settings between Ethernet and Wi-Fi.
Click Next.
A confirmation message is displayed.
Click OK.
The printer is updated.