Icons Displayed on the LCD Screen

This icon indicates that you are on the home screen.

This icon is displayed when a firmware update is available.

Tap it to update the firmware and improve the scanner's features. We recommend using the scanner with the latest version of the firmware.

Tap this icon to display the network connection status and to check and change the current settings. This is the shortcut for the following menu.

Settings > Network Settings > Wi-Fi Setup

The scanner is not connected to a wired (Ethernet) network or network connection settings have not been configured.

The scanner is connected to a wired (Ethernet) network.

The scanner is not connected to a wireless (Wi-Fi) network.

The scanner is searching for an SSID, the IP address has not been set, or the scanner is having a problem with a wireless (Wi-Fi) network.

The scanner is connected to a wireless (Wi-Fi) network.

The number of bars indicates the signal strength of the connection. The more bars there are, the stronger the connection.

The scanner is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.

The scanner is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.

This icon indicates whether or not the DFDS Function (Double Feed Detection Skip Function) feature is enabled. When enabled, the icon changes to .

This feature skips double feed detection once and continues scanning. Enable this to scan originals that are detected as double feeds, such as originals with labels or stickers attached.

This icon indicates that the user restriction feature is enabled. Tap this icon to log in to the scanner. You need to enter the password. Contact your scanner administrator for the password.

When is displayed, a user with access permission is logged in. Select the icon to log out.

Tap this icon to return to the previous screen.

This icon indicates that the scan settings have been changed from the factory default or the default set in User Settings.

This icon indicates that there is additional information. Tap the icon to display the information.

This icon indicates a problem with the scanner. Tap the icon to check for solutions.

• Roller Replacement: The number of scans has exceeded the life cycle of the rollers. Replace the rollers.

• Glass Cleaning: Dirt has been detected on the glass surface inside the scanner (the ADF scanning sensor). Clean the ADF. When cleaning is complete, reload the original in the ADF.

• Regular Cleaning: It is time to clean inside the scanner (ADF).

  Cleaning the ADF

This icon indicates that an original is loaded in the ADF.

When there is no original in the ADF, it will be grayed out ( ).