Icons Displayed on the LCD Screen

This icon indicates that you are on the home screen.

Returns to the home screen.

Displays the network connection status.

Select the icon to check and change the current settings. This is the shortcut for the following menu.

Settings > Network Settings > Wi-Fi Setup

The scanner is not connected to a wired (Ethernet) network or unset it.

The scanner is connected to a wired (Ethernet) network.

The scanner is not connected to a wireless (Wi-Fi) network.

The scanner is searching for SSID, unset IP address, or having a problem with a wireless (Wi-Fi) network.

The scanner is connected to a wireless (Wi-Fi) network.

The number of bars indicates the signal strength of the connection. The more bars there are, the stronger the connection.

The scanner is not connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.

The scanner is connected to a wireless (Wi-Fi) network in Wi-Fi Direct (Simple AP) mode.

This icon indicates whether or not the DFDS Function (Double Feed Detection Skip Function) feature is enabled. When enabled, the icon changes to .

This feature skips double feed detection once and continues scanning. Enable this to scan originals that are detected as double feeds, for example plastic cards or envelopes.

This icon indicates whether or not the Slow feature is enabled. When enabled, the icon changes to .

This feature slows down the scanning speed. Enable this to scan originals that are likely to jam, for example thin paper.

Indicates that the user restriction feature is enabled. Select this icon to log in to the scanner. You need to enter the password. Contact your scanner administrator for the password.

When is displayed, a user with access permission has logged in. Select the icon to logout.

Returns to the previous screen.

Indicates that the scan settings have been changed from the factory default or the default set in User Settings.

Indicates that there is additional information. Select the icon to display the message.

Indicates a problem with the items. Select the icon to check how to solve the problem.

• Roller Replacement: The number of scans exceeds the life cycle of the rollers. Replace the rollers.

• Glass Cleaning: Dirt has been detected on the glass surface inside the scanner. Clean the inside of the scanner.

• Regular Cleaning: It is time to clean inside the scanner.

This may appear when the authentication function is enabled. You can change the password or the ID number of your authenticated account.