Fax Settings

Select the resolution of the outgoing fax. If you select a higher resolution, the data size becomes larger and it takes time to send the fax.

Sets the density of the outgoing fax. + makes the density darker, and - makes it lighter.

Select the darkness of the background. Tap + to lighten (whiten) the background and tap - to darken (blacken) it.

If you select Auto, the background colors of the originals are detected, and they are removed or lightened automatically. It is not applied correctly if the background color is too dark or not detected.

Enhances or defocuses the outline of the image. + enhances the sharpness, and - defocuses the sharpness.

Scans both sides of originals placed in the ADF and sends a monochrome fax.

Sending faxes by placing originals one by one, or by placing originals by size, you can send them as one document at their batches of same size originals.

Sending Different Size Documents Using ADF (ADF Continuous Scan)

Select the size and orientation of the original you placed on the scanner glass.

Select whether to scan in color or in monochrome.

Sends a monochrome fax while scanning the originals. Since scanned originals are not stored temporarily in the printer's memory even when sending a large volume of pages, you can avoid printer errors due to a lack of memory. Note that sending using this feature takes longer than not using this feature.

You cannot use this feature when:

• Sending a fax using the ADF 2-Sided option

• Sending a fax to multiple recipients

Sending Many Pages of a Monochrome Document (Direct Send)

Sends a fax at a time you specify. You can only send monochrome faxes when using this option.

Fax Send Settings:

Select the position where you want to include the header information (sender name and fax number) in the outgoing fax, or not to include the information.

• Off: Sends a fax with no header information.

• Outside of Image: Sends a fax with header information in the top white margin of the fax. This keeps the header from overlapping with the scanned image, however, the fax received by the recipient may be printed across two sheets depending on the size of the originals.

• Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the scanned image. The header may overlap with the image, however, the fax received by the recipient will not be split into two documents.

Select the header for the recipient. To use this feature, you should register multiple headers in advance.

Select the information you want to add. You can select one from Your Phone Number and Destination List.

Prints a transmission report after you send the fax.

Print on Error prints a report only when an error occurs.

When Attach Fax image to report has been set in Settings > General Settings > Fax Settings > Report Settings, faxes with errors are also printed with the report.

Restores all settings in Scan Settings and Fax Send Settings to their defaults.