Buttons and Functions

Turns the printer on or off.

Unplug the power cord after checking that the power light is off.

When a network error occurs, pressing this button cancels the error. Hold this button down for more than 5 seconds to perform Wi-Fi auto setup using the WPS push button.

Prints a network connection report allowing you to determine the causes of any problems you may have using the printer on a network. If you need more detailed network settings and connection status, hold this button down for at least 7 seconds to print a network status sheet.

Starts monochrome copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press this button within one second intervals.

Starts color copying on A4 size plain paper. To increase the number of copies (by up to 20 copies), press this button within one second intervals.

Stops the current operation.

Hold this button down for five seconds until the button flashes to run print head cleaning.

+

Check Scanned Images

Press the and buttons simultaneously to run software on a USB-connected computer and check scanned images.

+ or

Copy in Draft Mode

Press the and the or buttons simultaneously to copy in draft mode.

For users in Western Europe, draft mode is not available.

+

PIN Code Setup (WPS)

Hold down the and buttons simultaneously to start PIN Code Setup (WPS).

+

Wi-Fi Direct (Simple AP) Setup

Hold down the and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.

+

Restore Default Network Settings

Turn the printer on while holding down the button to restore the default network settings. When the network settings are restored, the printer turns on and the network status lights flash alternately.

+

Print Nozzle Check Pattern

Turn the printer on while holding down the button to print the nozzle check pattern.