Adjusting the Print Color

You can adjust the colors used in the print job. These adjustments are not applied to the original data.

PhotoEnhance produces sharper images and more vivid colors by automatically adjusting the contrast, saturation, and brightness of the original image data.

Note:

PhotoEnhance adjusts the color by analyzing the location of the subject. Therefore, if you have changed the location of the subject by reducing, enlarging, cropping, or rotating the image, the color may change unexpectedly. Selecting the borderless setting also changes the location of the subject resulting in changes in color. If the image is out of focus, the tone may be unnatural. If the color is changed or becomes unnatural, print in a mode other than PhotoEnhance.

  1. Select Color Matching from the pop-up menu, and then select EPSON Color Controls.

  2. Select Print Settings from the pop-up menu.

  3. On the Basic tab, select the type of color correction from Color Settings.

  4. Select the Advanced Color Settings tab, and then set the Gamma, Brightness, Contrast, Saturation, and so on.

  5. Set the other items as necessary.

  6. Click Print.