Installing Ink Cartridges

1  When instructed to install the ink cartridges, open the scanner unit.

Important:

Do not touch the white cable inside the printer.

2  Gently shake only the BLACK (BK) cartridge four or five times. Do not shake Photo Black (PBK) or other color cartridges. Remove all ink cartridges from their packages.

Note:

  • For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot be saved for later use.

  • Do not touch the sections shown in the illustration of the cartridge.

3  Remove the caps and store them in the plastic bag.

4  Insert the ink cartridge diagonally into the cartridge holder and gently push it down until it clicks into place. Repeat this step to insert all ink cartridges.

Important:

Make sure all the cartridges are aligned.

5  Close the scanner unit slowly.

6  Press the button on the printer to start charging the ink.

Note:

  • Do not turn off the printer until ink charging is finished. The screen for adjusting the printer to guarantee print quality is displayed when ink charging is finished.

  • The initial ink cartridges will be partly used to charge the print head. These cartridges may print fewer pages compared to subsequent ink cartridges.

Next»